Pump Heads Designed for Multi-Channel Fluid Transfer
LP-DG15 series pump heads are designed for medium and small flow rates through multi-channel fluid transfer.
The LP-DG15-24 can replace two stacked YZ1515x pump heads.
It is easy to change and fix the tubing and the occlusion can be adjusted slightly.
The rollers are made from high-quality materials.
The pump head consists of a base, rotor assembly and easy-to-load cartridges.
Features
- Cartridges and base can be separated. Tubing can be loaded conveniently.
- Suitable for several tubing sizes for a wide flow range
- Occlusion can be adjusted slightly to meet different tubing wall thickness requirements
- The roller material is stainless steel
- The cartridge working surface material is POM. It is perfectly self-lubricating to reduce tubing wear abrasions
Specifications
| Type |
Speed (rpm) |
Tubing size (#) |
Flow rate (ml/min/channel) at 0.1 - 600 rpm (measured with water) |
Cartridge
material |
Roller
material |
Roller
quantity |
Weight (kg) |
| LP-DG15-24 |
< 600 |
16 |
0.082 - 490 |
POM |
Stainless steel |
4 |
0.82 |
| 25 |
0.192 - 1150 |
| 17 |
0.3 - 1800 (0.1-350 rpm) |
| Type |
Speed (rpm) |
Tubing size |
Flow rate (ml/min/channel) at 0.1 - 100 rpm measured with water |
|
|
LP-DG15-28
LP-DG15-48
(Small cartridges) |
0.1-100 |
Inner diameter: ≤3.17 mm
Wall thickness: 0.8-1.0 mm
|
Max. 75 |
8 |
0.67 |
| 0.5 mm x 0,8 mm |
0.03 - 3.2 |
| 1 mm x 1 mm |
0.13 - 10 |
| 2 mm x 1 mm |
0.3 - 46 |
| 2.4 mm x 0,8 mm |
0.5 - 46 |
| 13# (ID 0.8 mm, WT 1.6 mm) |
0.07 - 3.8 |
| 14# (ID 1.6 mm, WT 1.6 mm) |
0.27 - 18 |
Choose the right tubing
These pump heads use standard tubing and micro-flow tubing with stoppers.
Use the Flow Rate curves (see the pictures) to select the correct tubing for your purpose.