Representative image only

LabT MiniPump Peristaltic Pump

Price from EUR 542.80

(excl. VAT)

LabT is a compact, simple, low vibration and quiet peristaltic pump with an ABS plastic housing. This pump is replacing the LabS3 pump.

With pumpheads MiniPump01 or Minipump02 and at flow rates between 0.1 - 300 rpm you have the ability to run at custom speeds for your application.

The OLED display gives you an easy overview of speed, direction and external control.

Included Tubing Sets

For the MiniPump01 pump head variant with 1 channel, 5 different sizes of PharMed BPT tubing sets with fittings and holders are included.
For the MiniPump02 pump head variant with 2 channels, 4 different sizes of PharMed BPT tubing sets with fittings and holders are included.

Note

This pump has a fixed pump head that cannot be replaced with another type.

LabT MiniPump Peristaltic Pump

Items

Price

Note

Quantity

Type: With MiniPump01 pump head with 1 channel and tubing sets in 5 sizes

Model/Product no.: LABT/MINIPUMP01

EUR 548.90

(excl. VAT)

Not in stock

Weight: 1.1 kg
Type: with MiniPump02 dual-channel pump head and 4 sizes of tubing sets

Model/Product no.: LABT/MINIPUMP02

EUR 542.80

(excl. VAT)

2 pcs. in stock

Weight: 1.1 kg

Compact, silent peristaltic pump with low flow rate

LabT is a compact, simple, low vibration and very quiet peristaltic pump with an ABS plastic housing. This pump is replacing the LabS3 pump.
At flow rates between 0.1 - 300 rpm you have the ability to run at custom speeds for your application.
The OLED display gives you an easy overview of speed, direction and external control.
This pump must be ordered with the pump head you need for your application as it is not easy to replace afterwards.

Technical Specifications

Flow rate range: 0.0024-190 ml/min/channel
Speed range: 0.1 - 300 rpm
Speed resolution: 0.1 rpm
Display: 0.96 "OLED display
Operation: Rotary switch and mechanical keypad
Speed control: Rotary switch
External signal for speed control: 0-5V, 4-20 mA (standard), 0-10V (optional)
External signal for start / stop and direction: Switch signal
Communication interface: USB connector, RS485 interface (MODBUS protocol, RTU mode)
Power supply:
- Output: DC 24 V / 1.25 A
- Input: AC100 V-240 V, 50 Hz/60 Hz
Pump housing material: ABS plastic
Pump housing dimensions: (LxDxH): 190x128x135 mm
Operating temperature: 0-40°C
Relative humidity <80%
IP rate: IP31
Weight: 1.1 kg
Power consumption: <15 W

Operating Manual

Supplied with English operating manual

Parameters

Motor	Pump head	Tubing size (#)	Tubing dimensions (mm) Inner diameter x wall thickness	Flow rate (ml/min/channel) at 0.1 - 300 rpm (measured with water)
LabT	MiniPump01	13#	0.8×1.6	0.0024 - 8.28
	MiniPump01	14#	1.6×1.6	0.0112 - 33.88
	MiniPump01	19#	2.4×1.6	0,026 - 77.23
	MiniPump01	16#	3.1×1.6	0.039 - 114.31
	MiniPump01	25#	4.8×1.6	0.063 - 190.00
	MiniPump02		1x1	0.005 - 15.01
	MiniPump02		2x1	0.18 - 54.63
	MiniPump02		2.5x1	0.26 - 76.84
	MiniPump02		3x1	0.036 - 108.39

Pump head information

The MiniPump01 pump head has 1 channel, and 5 different sizes of PharMed tube sets with holders are included.
The MiniPump02 pump head has 2 channels, and 4 different sizes of PharMed tube sets with holders are included.

Weight	1.1 kg
Material	ABS plastic housing
CE marking	Yes
IP-Rating	IP31
Speed	0.1 - 300 rpm
Flow rate	0.0024 ml/min - 190 ml/min/channel
Power supply	DC 24V/1.25A
Operating Temperature	0-40°C
Relative humidity	< 80%
Size (Length)	190 mm
Size (Height)	135 mm
Size (Width)	128.3 mm
Caption	Representative image only