Industrial High Flow Rate Peristaltic pump for Bio-pharmaceutial and Industrial Applications
The dPOFLEX BP01 peristaltic pump from Longer is a high flow rate industrial pump primarily designed for use in pharma and industrial production.
The BP01 peristaltic pump has a 304 stainless steel housing and an IP66 rating, which makes it suitable for operation in dusty and humid industrial environments.
The dPOFLEX BP01 peristaltic pump meet 21CFR Part 11 and GMP laboratory requirements.
To achieve preventive maintenance, it is possible to integrate several types of sensors, for example: liquid leakage sensor, open head sensor, flow rate sensor and pressure sensor.
The dPOFLEX BP01 peristaltic pump can deliver flow rates between 1.1 ml/min~17.0 l/min and the dosing volume is from 1.0 ml to 274.9 liters, depending on which pump head and tubing it is equipped with.
The pump has a 4.3 LCD screen that shows the menu and operating parameters, which can be set via the membrane keyboard or by an external signal.
Technical date for the dPOFLEX BP01 Peristaltic Pump
| Pump drive model | dPOFLEX0 BP01 | |
| Housing material | 304 stainless steel | |
| Speed range | 0,1 rpm - 265 rpm, CW/CCW | |
| Speed resolution | 0.1 rpm | |
| Display | 4.3" LCD | |
| Clock function | Year/month/day/hour/minute can be set. Hours and minutes are displayed on the running screen. |
|
| Work mode | Flow rate mode, dispensing mode, calibration mode | |
| Flow rate mode | The pump runs continuously at the set flow rate. It displays the flow rate and pump speed on the screen. | |
| Flow rate setting range | 1.1ml/min - 17.0L/min（depending on the pump head and tubing size/material） | |
| Dispensing mode | The pump repeats the dispensing at a set volume, cycles and interval time. It displays the single volume, dispensed volume and dispensed cycles/target cycles on the screen. |
|
| Volume of a single dose | 1.0 ml - 274.9 liters depending on the pump head and tubing size/material） | |
| Dispensing cycles | 1-9999 (0 for unlimited) | |
| Interval time | 5 sec. to 9999 sec. | |
| Calibration function | Improves the flow rate and dispensing volume accuracy. | |
| Control mode | Keypad control, external signal control and communication control. | |
| Communication control |
RS485 that support Modbus RTU mode - standard |
|
| External control | Speed control: 0-10V, 4-20mA Start/stop, direction control: 5V-24V logic level signal or relay signal (dry contact) |
|
| Status output | Pump Speed: 0-10V, 4-20mA Running/stopped, direction, tubing leakeage alarm: relay signal (dry contact) |
|
| Open-head sensor | The pump will stop when the pump head is open for enhanced user safety. | |
| Status when powered up | Stopped | |
| Keypad lock function | Enable the keypad lock function to lock the keypad automatically after 20 sec. standby. (The start/stop button will not be locked) |
|
| Tubing leak detection | Detects if there is a tubing leak and gives an alarm (optional, leak sensor can be ordrered) | |
| Flow rate measurement | Measures the flow rate by connecting flow meter (optional, can be ordered) | |
| User access control | Three levels of user access (administrator, technician, operator) | |
| Electronic signature and audit trail | Meet the requirement of FDA 21CFR Part 11 | |
| Log record | Record 90 days operation history, which can be exported directly. | |
| Support IQ/OQ | Meet GMP requirement | |
| Certificates | EN 61010-1:2010, EN IEC 61010-2-201 EMC: EN IEC61000-6-2, EN IEC 61000-6-4 |
|
| Dimensions (L x W x H) | 260 x 407 x 290 mm | |
| Power supply | AC100-240V 50/60Hz | |
| Operating condition | Temperature: 5℃-40℃ Relative humidity ≤100% |
|
| IP-rating | IP66 | |
| Weight (drive only) | ≤16.6kg | |
Pump heads and compatible tubing sizes
| Pump model | Pump head | Number of rollers | Tubing size # | Tubing dimensions Inner diameter x wall thickness (mm) |
Reference max. flow rate (l/min) (meassured with water) |
| dPOFLEX BP01 | GPH01 (die-cast aluminum housing with 304ss rollers) |
2 | 26 | 6.4 x 3.2 | 3,0 |
| 73 | 9.5 x 3.3 | 6,0 | |||
| 82 | 12.7 x 3.3 | 10,5 | |||
| 184 | 15.9 x 3.2 | 15 | |||
| GPH02 (die-cast aluminum housing with 304ss rollers) |
2 | 186 | 12 x 4 | 9,5 | |
| 188 | 17 x 4 | 17 | |||
| GPH03 (die-cast aluminumhousing with 304ss rollers) |
4 | 186 | 12 x 4 | 8,5 | |
| 188 | 17 x 4 | 14 | |||
| LPH01 low pulsation (anodized aluminum housing with 304ss rollers) |
6 | 185 | 8 x 4 | 4.5 (double tube assembly) | |
| 186 | 12 x 4 | 9 (double tube assembly) | |||
| 187 | 16 x 4 | 13.5 (double tube assembly) |
Videos
Introduction to the dPOFLEX peristaltic pump
Introduction to the user interface on the dPOFLEX BP01 Peristaltic pump
Setting the access control on the dPOFLEX BP01 Peristaltic pump
Setting the flow rate on the dPOFLEX BP01 industrial Peristaltic pump
Calibrating the dPOFLEX BP01 industrial peristaltic pump
Installing tubing with connectors in the GPH pump head on the dPOFLEX BP01 peristaltic pump
Setting the parameters for external control on the dPOFLEX BP01 industrial peristaltic pump
Setting the external communication control on the dPOFLEX BP01 industrial peristaltic pump
Installing a flow sensor on the dPOFLEX BP01 industrial peristaltic pump (can be purchased separately)
Liquid leakage sensor on the dPOFLEX BP01 peristaltic pump (can be purchased separately)
| Weight | 21 kg |
| Material | 304 stainless steel |
| CE marking | Yes |
| IP-Rating | IP66 |
| Speed | 0,1 - 265 rpm |
| Flow rate | 1.1 - 17000 ml/min |
| Power supply | AC100-240V 50/60Hz |
| Operating Temperature | 0-40°C |
| Relative humidity | <100 % |
| Caption | Representative image only |
| Title | Type | Size | Download |
|---|---|---|---|
| dPOFLEX-Peristaltic-Pump---Catalog-2022.pdf | 2.11MB | Download | |
| dPOFLEX-Peristaltic-pump---Datasheet-2022.pdf | 1.68MB | Download |
