LONGER - Foot switch for pumps
LONGERFoot switch for controlling pumps from LongerPump.
EUR 64.90
(excl. VAT)Gear Pump with flow rate and dispensing modes
The LP-WT3000-1FA dispensing micro-gear pump has flow rate and dispensing modes so it can deliver flow rates from 85.7 to 2571.4 ml/min and a dispensing volume from 0.1 ml to 999 litres.
This dispensing micro-gear pump has a 128×32 LCD to display the running parameters.
The stainless steel pump head is compact and precise with a low noise level and small pulse. It is suitable for delivering high pressure and high temperature liquids.
Specifications
- Speed: 300 rpm-3000 rpm
- Speed resolution: 1 rpm
- Flow rates: 85.7-2571.4 ml/min
- Dispensing volume: 0.1 ml-999 l
- Copy number: 0-9999, "0" means unlimited cycle
- Pause time: 1 sec to 999 hours, resolution: 0.1 sec
- Flow rate calibration time: 30 sec-1800 sec, resolution: 1s
- Speed signal input: 4-20 mA, 0.5-5V, 1.0-10V, 1.0-10 kHz, corresponding to 300-3000 rpm
- Start/stop signal input: TTL input
- Speed signal output: 1.25-12.5 kHz corresponding to 300-3000 rpm
- Start/stop signal output: Isolated TTL signal output
- Diameter of particle in liquid: ≤10 µm
- Viscosity of liquid: ≤200 cSt
- Power supply: AC 90V-260V 50W
- Liquid temperature range: -45-50°C with PTFE gear, -45° - 120 °C with PEEK gear
- Communication: RS485
- Power consumption: ≤50 W
- Operating temperature: 0 to 40 °C,
- Relative humidity: < 90%
Functions and features
- Acceptable pump heads: MG204, MG209, MG213
- The tubing connectors on the pump heads has an outer diameter of 6 mm, so they can be connected to tubing with an internal diameter of 4.8 mm (15 #).
- Flow rate function: Delivers the liquid according to set flow rates
- Dispensing function: Dispensing volume, copy number and pause time can be set
- Calibration function: The flow rates and the dispensing volume can be calibrated to increase the accuracy
- Operating mode: Membrane keypad
- Prime function: For fast filling and emptying
- External control input: Control the flow rates and start/stop of the pump
- External control output: Output start/stop and speed signal
- Foot switch: Control the start/stop of the pump
- Communication function: Computer control available through RS485 interface
- Memory function: Stores the running parameters automatically
- Cooling mode: Heat-emitting fan
- Running directions: Clockwise
Parameters
| Drive | Pump head | Speed (rpm) | Flow rates (ml/min) | Outlet Pressure (bar) | Weight (kg) |
| LP-WT3000-1FA | LP-MG204 | 300-3000 | 85.7-857.1 | 8 | 3.25 |
| LP-MG209 | 171.4-1714.3 | 8 | 3.26 | ||
| LP-MG213 | 257.1-2571.4 | 3 | 3.28 |
| Weight | 2.83 kg |
| CE marking | Yes |
| IP-Rating | IP31 |
| Speed | 300 rpm - 3000 rpm |
| Flow rate | 85.7 - 2571.4 ml/min |
| Power supply | AC90-260V/50W |
| Operating Temperature | 0 - 40°C |
| Relative humidity | < 80% |
| Size (Length) | 232 mm |
| Size (Height) | 149 mm |
| Size (Width) | 142 mm |
| Title | Type | Size | Download |
|---|---|---|---|
| WT3000-1FA-Operating-Manual.pdf | 3.50MB | Download | |
| LP-WT3000-Series-micro-gear-pump-2020-21.pdf | 1.12MB | Download | |
| mg200_gear_pump_datasheet.pdf | 725.58KB | Download |
Micro-Gear Pump LP-WT3000-1JA
LONGERBasic micro-gear pump.
Flow Rate: 85.7 to 2571.4 ml/min
Speed: 300-3000 rpm
Outlet Pressure: 3-8 bar
Price from EUR 1,845.30
(excl. VAT)
Micro Gear Pump LP-WT3000-1FB
LONGERMicro gear pump with flow rate and dispensing mode.
Speed: 300-3000 rpm
Flow rate: 85.7-2571.4 ml/min
Outlet pressure: 8-14 bar
Price from EUR 2,729.70
(excl. VAT)
LONGER - External control interfaces
LONGERStandard external control modules for pumps from LONGER
- 0,5-5V analog input
- 0-10V analog input
- 4-20 mA analog input
- 0-10 kHz Pulse input
- RS485 Communication control
- RS485 to RS232 converter
Price from EUR 16.80
(excl. VAT)
