Longer's dPOFLEX GP01 Peristaltic Pump is a high flow rate industrial peristaltic pump, designed to be used in a variety of applications.
The pump has a cast aluminum housing and a high IP protection rating (IP66), which makes it suitable for operation in dusty and humid industrial environments.
The GP01 pump meets 21CFR Part 11 and GMP laboratory requirements and in order to achieve preventive maintenance, it is possible to integrate several types of sensors, e.g.: liquid leakage sensor, open-head sensor, flow rate sensor, and pressure sensor.
The dPOFLEX GP01 peristaltic pump can deliver flow rates between 1.1 ml/min and 17.0 L/min and the dosing volume is between 1.0 ml and 274.9 liters, which all depends on which pump head and tubing that are fitted.
The pump comes with a 4.3" LCD screen that shows the menu and operating parameters, which can then be adjusted via the membrane keyboard or an external signal.
| Pump drive model | dPOFLEX GP01 | |
| Housing material | Casted aluminum | |
| Speed resolution | 0.1 rpm | |
| Display | 4,3" LCD | |
| Clock function | Year/month/day/hour/minute can be set. Hours and minutes are displayed on the running screen. |
|
| Work mode | Flow rate, dosing and calibration | |
| Flow rate mode | The pump runs continuously at the set flow rate. It displays the flow rate and pump speed on the screen. | |
| Flow rate settings range | 1.1 ml/min - 17.0 l/min (depending on the pump head and tubing size/material) | |
| Dispensing settings | The pump repeats the dispensing at a set volume, cycles and interval time. It displays the single volume, dispensed volume and dispensed cycles/target cycles on the screen. |
|
| Volume of one dosing | 1.0 ml - 274.9 liters depending on the pump head and tubing size/material） | |
| Dispensing cycles | 1-9999 (0 for unlimited) | |
| Interval time | 5 sek. to 9999 sec. | |
| Calibration function | Improves the flow rate and dispensing volume accuracy. | |
| Control method | Keypad control, external signal control and communication control. | |
| Communication control | RS485 that support Modbus RTU mode - standard TCP/IP interface for Industrial Ethernet (optional, has to be ordered with the pump) Profibus DP (optional, profibus module can be ordered) |
|
| External control | Speed control: 0-10V, 4-20mA Start/stop, direction control: 5V-24V logic level signal or relay signal (dry contact) |
|
| Status output | Pump Speed: 0-10V, 4-20mA Running/stopped, direction, tubing leakeage alarm: relay signal (dry contact) |
|
| Open head sensor | The pump will stop when the pump head is open for enhanced user safety. | |
| Status when powered up | Stopped | |
| Keypad lock function | Enable the keypad lock function to lock the keypad automatically after 20 sec. standby. (The start/stop button will not be locked) |
|
| Tubing leak detection | Detects if there is a tubing leak and gives an alarm (optional, leak sensor can be ordrered) | |
| Flow rate measurement | Measures the flow rate by connecting flow meter (optional, can be ordered) | |
| User access control | Three levels of user access (administrator, technician, operator) | |
| Electronic signature and audit trail | Meet the requirement of FDA 21CFR Part 11 | |
| Log record | Records 90 days operation history, which can be exported directly. | |
| Support IQ/OQ | Meets GMP requirements. | |
| Certificates | EN 61010-1:2010, EN IEC 61010-2-201 EMC: EN IEC61000-6-2, EN IEC 61000-6-4 |
|
| Dimensions (L x W x H) | 260 x 407 x 290 mm | |
| Power supply | AC100-240V 50/60Hz | |
| Operating condition | Temperature: 5℃-40℃ Relative humidity: ≤100% |
|
| IP rating | IP66 | |
| Weight | ≤17.6kg | |
| Pump model | Pump head | Number of rollers | Tubing size # | Tubing dimensions Inner diameter x wall thickness (mm) |
Max. flow rate (l/min) (measured with water) |
| dPOFLEX GP01 |
GPH01 |
2 | 26 | 6.4 x 3.2 | 3.0 |
| 73 |
9.5 x 3.3 |
6.0 | |||
| 82 | 12.7 x 3.3 | 10.5 | |||
| 184 | 15.9 x 3.2 | 15 | |||
|
GPH02 |
2 | 186 | 12 x 4 | 9.5 | |
| 188 | 17 x 4 | 17 | |||
|
GPH03 |
4 | 186 | 12 x 4 | 8.5 | |
| 188 | 17 x 4 | 14 | |||
| LPH01 low pulsation (anodized aluminum housing with 304ss rollers) |
6 | 185 | 8 x 4 | 4.5 (double tube assembly) | |
| 186 | 12 x 4 | 9 (double tube assembly) | |||
| 187 | 16 x 4 | 13.5 (double tube assembly) |
| Weight | 21 kg |
| Material | Cast aluminum |
| CE marking | Yes |
| IP-Rating | IP66 |
| Speed | 0,1 - 265 rpm |
| Flow rate | 1.1 - 17000 ml/min |
| Power supply | AC100-240V 50/60Hz |
| Operating Temperature | 0-40°C |
| Relative humidity | <100 % |
| Caption | Representative image only |
| Title | Type | Size | Download |
|---|---|---|---|
| GP01-BP01-Industrial-Peristaltic-Pump-Datasheet-2024---DRIFTON.pdf | 1.74MB | Download |
Sterile platinum cured silicone tubing for GMP pharmaceutical processes such as life science and medical equipment.
Also suitabel for food & beverage dispensing.
Manufactured and packed in clean room.
Tubing life: approx. 80 hours at 600 rpm
Standards: USP Class VI, FDA regulations 21 CFR 177.2600, NSF-51, RoHS, REACH, 1935/2004/EC
Price from EUR 52.60
(excl. VAT)
PharMed BPT (Ismaprene) is the ideal tubing for pharmaceutical and medical applications and foodstuffs.
Tubing life: 1000+ hours
Standards: USP, FDA, NSF
Price from EUR 208.90
(excl. VAT)
Process pump for biopharmaceutical applications with sensor integration.
Number of pump heads: 1
Number of channels: 1
Housing materisl: 304 stainless steel
Speed range: 0.1-265 rpm.
Flow rate: 1.1 ml/min -17 L/min
External control options: yes
Dosing function: yes
IP66
Three levels of user access
Meets 21CFR Part 11 and GMP requirements
Price from EUR 6,936.90
(excl. VAT)
Powerful peristaltic flow rate pump with touch screen control for industrial use.
Operating modes: 3
Dosing function: Yes
Pump heads: 1-2
Channels: 1-2
Speed: 0.1-600 rpm.
Flow rate: 0.69-12000 ml/min/channel
External control: start/stop, direction, speed
IP31
Price from EUR 2,235.30
(excl. VAT)
