ExD-600-12L ATEX-Certified Peristaltic Pump for Explosive Environments
The ExD-600-12L is an ATEX-certified peristaltic pump designed for precise liquid handling in explosive environments. With IP66 protection, a cast aluminum pump head, and intelligent control, it ensures reliable dosing in the chemical industry, pharmaceutical production, and refineries.
Features:
- ATEX-certified (II2G Ex db IIC T4 Gb & II2D Ex tb IIIC T130°C Db).
- Complies with standards: EN IEC 60079-0:2018+A11:2024, EN IEC 60079-1:2014+A11:2024, EN IEC 60079-31:2018.
- IP66 protection – resistant to humid and dusty environments.
- Cast aluminum pump head – high strength and durability.
- 304 stainless steel rollers – resistant to corrosion and liquid leakage.
- Intelligent LCD control – precise adjustment of flow and dispensing.
- Explosion-proof control buttons and rotary knob.
- External control via RS485, Modbus RTU, 0-10V, 4-20mA signals.
- Variable flow rate up to 12,000 ml/min depending on tubing size.
Technical Specifications:
General Data:
- Speed range: 0.1-600 rpm.
- Speed resolution: 0.1 rpm.
- Display: 4.3” industrial-grade color LCD.
- Control: Mechanical buttons, explosion-proof rotary knob, external control signals, and communication.
- Operating modes: Flow rate mode, dispensing mode.
- Flow rate mode: Continuous liquid transfer based on the set flow rate or motor speed.
- Dispensing mode: Setting dispensing volume, dispensing time, pause time, and repeat number.
- Dispensing volume: 0.1 ml - 9999 l.
- Dispensing time: 0.1 sec - 9999 hours.
- Pause time: 0.5 sec - 9999 hours.
- Repeat number: 1 - 9999 (0 = unlimited).
- Calibration function: Automatic volume setting and calibration.
- Back suction angle: 0-360°.
Communication & External Control:
- Communication: RS485.
- Communication protocol: Modbus RTU.
- External control speed signal: Choose between 0-5V, 0-10V, or 4-20mA.
- External control signal input:
- Active switch signal (5-24V) for start/stop, direction change, and full speed.
- Passive switch signal for start/stop.
- External control signal output: Open collector output status.
Pump Head & Tubing Sizes:
- Pump head: YZ35-II.
- Tubing sizes:
- 73# (9.6 × 3.3 mm) – Flow range: 1.23-7400 ml/min.
- 82# (12.7 × 3.3 mm) – Flow range: 2-12,000 ml/min.
- Pressure Resistance:
- 73#: Continuous operation: 0.27 MPa / Intermittent operation: 0.2 MPa.
- 82#: Continuous operation: 0.14 MPa / Intermittent operation: 0.1 MPa.
- Pump head weight: 2.8 kg.
Physical Data & Power Supply:
- Overall dimensions (L × W × H): 458 × 285 × 335 mm.
- Power supply: AC220V ±10%, 50Hz.
- Power consumption: 300W.
- Maximum relative humidity: <90%.
- Operating temperature: 0-40°C.
- IP rating: IP66.
- Total weight: 30.1 kg.
Applications:
Suitable for the chemical industry, pharmaceutical production, refineries, and other industries with explosion-proof requirements.
Note: The pump is supplied without an explosion-proof cable. Customers must source this cable independently to ensure proper installation and compliance with safety standards.
Operating Manual
- Supplied with English operating manual
Parameters
Videos
Introduction to the ExD Series ATEX Peristaltic Pumps
| Weight | 30.1 kg |
| CE marking | Yes |
| IP-Rating | IP66 |
| Speed | 0.1 - 600 rpm |
| Flow rate | 1.23-12000 ml/min. |
| Power supply | AC220V ±10%, 50Hz |
| Operating Temperature | 0-40 ℃ |
| Relative humidity | < 90% |
| Size (Length) | 458 mm |
| Size (Height) | 335 mm |
| Size (Width) | 285 mm |
| Caption | Representative image only |
