F6-12L Peristaltic Dispensing Pump

F6-12L High Speed Peristaltic Dispensing Pump

The F6-12L dispensing pump is the ideal choice for laboratories and industrial production. It is a high speed intelligent peristaltic tube pump with dispensing function that is suitable for high flow volume, high efficiency and precision dispensing. 

The F6-12L peristaltic pump has a stainless steel housing and touch screen control. The touch screen provides easy operation and dynamic display of the current state. You get the complete overview of your dispensing task, e.g. dispensing data, setting parameters and system configuration on the same screen.

Speed range is  0.1-600 rpm and flow rate is  0.69 to 12000 ml/min.

You can connect a foot pedal or achieve external control through a switch signal. The output signal can be used for remote monitoring of the pump.

Functions and Features

• Imported 4.3" - industrial grade - true color LCD screen with clear picture quality. Dynamic display of real-time trasferring status. The flow rate, motor speed, setting parameters and system configuration display in the same screen.
• Intelligent calibration function, calibrate the flow rate and dispensing volume to ensure the flow accuracy. Suitable for high accuracy liquid transferring.
• Fast filling function that can wash and also fill fluid into the tubing.
• Power down memory function that stores the running parameters in time - safe and reliable.
• Automatic temperature control system that reduces the noise of the fan effectively.
• Strong anti-jamming feature with wide voltage design, that is suitable for complex power supply environments.
• Dispensing counting function, where you need to clear the number manually. This is convenient for counting the total number of dispensings when dispensing maually.
• On-line micro adjusting function, you can adjust the flow rate during production progress to avoid filling errors caused by tubing fatigue and decrease in elasticity.
• The pump can store 60 commonly used filling modes.
• Back suction angle setting to avoid liquid dripping when the pump stops.
• External start/stop control function - you can connect a foot pedal or computer control when working in a filling line.
• Circuit board spray with three layers (anti-dust, anti-moisture, anti-static, resist corrosion)

Technical Specification

• Flow rate range:  0.69 -12000 ml/min/channel
• Speed range:  0.1 -600 rpm
• Speed resolution: 0.01 rpm
• Dispensing volume range: 0.1 - 9999.99 ml
• Dispensing voume resolution: 0.01 ml
• Dispensing time: 0.1-9999.99 sec
• Pause time: 0.1-9999.99 sec
• Time resolution: 0.01 sec
• Copy numbers: 1-9999, setting “0”means unlimited 
• Back suction angle: 0-360°
• Dispensing accuracy: <±0.5%
• Motor type: Servo motor
• Display: 4.3" industrial grade true color LCD screen
• Control method: Touch screen and membrane keypad
• Start/stop, direction signal: Passive switch signal, such as foot pedal. Active switch signal: 5V, 12V and 24V (optional)
• Communication interface: RS232/RS485 support MODBUS protocol (RTU mode)
• Outlet pressure: 0.3 Mpa (3 bar)
• Power consumption: < 300W

Operating Manual

• Supplied with English operating manual

Parameters

Videos

Filling bottles with shampoo using the F6-12L industrial peristaltic pump