Refrigerated microcentrifuge with high speed
The microcentrifuge iFuge M24PR is important for a laboratory where liquid samples are being analyzed. This micro centrifuge iFuge M24PR is designed to separate, sediment, spin down aqueous solutions and solvent suspensions of different densities in suitable sample tubes. The microcentrifuge is equipped with refrigeration which can be maintained between -20°C and 40°C. There is a built-in condensation orifice in order to eliminate accumulated condensated water.
High speed possibility
The iFuge M24PR can be set with a velocity between 500 and 15000 rpm. You can swiftly change the value by activating the buttons at the front and you can even do it while the microcentrifuge is in operation.
Rotor replacement options give flexibility
You have to purchase the rotor(s) additionally that you wish to use in the iFuge M24PR. Different rotors can be purchased as accessories so you easily can chose the most appropriate one for your samples.
Remember always to balance the rotor before centrifugation by placing the samples correctly and symmetrically. There is a smart imballance detector in the microcentrifuge iFuge M24PR to discover any imballance in the rotor.
Important: Do not use liquids with a density higher than 1.2 g/ml for full load operation.
You can conveniently set and save different speed, time and temperature for any line in the programming mode. You can then select any program from 1 to 99 programs and you can have user specific setting parameter for all programs. Every line of the program can have different values for all setting parameters.
Technical data for microcentrifuge iFuge M24PR
|Max. rotor capacity||44 places x 1.5 / 2 ml micro tubes|
|Temperature range||From -20°C to 40°C|
|Speed setting||500 - 15,000 rpm|
|Speed accuracy||+ 100 rpm|
|Time setting||30 sec. to 999 min. and infinite mode|
|Display||Large back lit LCD display|
|Programmable feature||Yes. User can set and save up to 99 user defined programs of 4 lines each|
|Lid lock safety||Yes|
|Noise level||<60 dB|
|Motor type||Brushless DC motor|
|Dimensions (WxDxH)||325 x 720 x 305 mm|
|Power consumption||650 W|
|Rotors and adaptors included in the standard package||T-Allen wrench
Adaptors for 0.4/0.5 ml tubes
Adaptors for 0.1/0.2 ml tubes
|Optional rotors||For 24 places x 1.5 / 2 ml micro tubes
For 44 x 1.5 / 2 ml micro tubes
For 8 x 5 ml micro tubes
For 8 x 4 x 0.1 / 0.2 ml PCR strips