High Flow Rate Peristaltic Dispensing Pump
The LP-WT600-1F peristaltic dispensing pump is mainly designed for laboratory and industrial production. It uses a brushless motor and is suitable to drive multiple pump heads.
The LP-WT600-1F dispensing pump delivers flow rates from 0.7 ml to 6000 ml/min and the dispensing volume ranges from 0.1 ml to 99.9 l.
Combined LCD with membrane keypad and rotary encoded switch makes the operation of the dispensing pump easy and prompt. The speed can be adjusted manually or automatically through an external control interface.
Specifications
- Flow rates: 0.7 to 6000 ml/min/channel
- Speed: 10 to 600 rpm, reversible
- Speed resolution: 1 rpm
- Control mode: The speed can be adjusted manually with the rotary encoded switch combined with the membrane keypad, or automatically through the external signal and communication control.
- Display: LCD displays current running status and parameters
- Dispensing volume: 0.1 ml to 99.9 litres
- Dispensing volume calibration: Calibrate dispensing volume to increase accuracy
- Copy number: 0 to 9999, "0" means unlimited cycle
- Pause time: 0.1 sec. to 99.9 min, resolution is 0.1 sec
- Back suction: 0 to 9.9 cycle, resolution is 0.1 cycle
- External control: Start/stop, cw/ccw control and speed control (0-5V, 0-10V, 4-20 mA, 0-10 kHz optional external control module)
- Speed signal output: 166.7 Hz-10 kHz corresponding to 10-600 rpm
- Start/stop signal output: OC gate signal output
- Direction signal output: OC gate signal output
- Communication interface: RS485
- Memory function: Storing the running parameters automatically
- Prime key: For fast filling and emptying
Operating Manual
- Supplied with English operating manual
Parameters
Drive | Pump head | Tubing size # | Flow rate (ml/min/channel) at 10 - 600 rpm (measured with water) | Weight (kg) |
LP-WT600-1F |
(1, 2, 3 pcs) x LP-YZ1515x (3 rollers) or (1, 2, 3 pcs) x LP-YZII15 (3 rollers) |
13 | 0.7 - 38 | 5.6-6.4 |
14 | 2.5 - 150 | |||
19 | 4.2 - 250 | |||
16 | 7.7 - 460 | |||
25 | 16 - 960 | |||
17 | 26 - 1600 | |||
18 | 36 - 2200 | |||
(1, 2, 3 pcs) x LP-YZ2515x (3 rollers) | 15 | 16 - 960 | ||
24 | 26 - 1600 | |||
(1, 2 pcs) x LP-YZII25 (3 rollers) | 15 | 19 - 960 | 5.6-6.0 | |
24 | 26- 1600 | |||
35 | 36 - 2200 | |||
36 | 50 - 3000 | |||
LP-DG15-24 (4 rollers) | 16 | 8.2 - 490 | 6.0 | |
25 | 19.2 - 1150 | |||
17 | 30 - 1800 | |||
(1, 2 stk) x DMD15-13-B (3 rollers) | 13 | 1.3 - 60 | 5.6-6.0 | |
14 | 5.0 - 300 | |||
19 | 10.3 - 620 | |||
16 | 16 - 960 | |||
25 | 35 - 2070 | |||
LP-KZ25 (3 rollers) | 15 | 30 - 1800 | 6.0 | |
24 | 58 - 3500 | |||
35 | 83 - 5000 | |||
36 | 100 - 6000 |
Note: If you choose a LP-YZ1515x with 6 rollers the flow rate will be 2/3 of the flow rate LP-YZ1515x with 3 rollers.
Pump head material
- PESU (Polysulphone material) is white, has good rigidity and high precision. It is usually used in research laboratories and supporting analytical devices. The PESU material can resist temperatures from -100℃ to 150℃ and can resist corrosion from most inorganic acid, base and salt.
- PPS (Poyphenylene sulfide material) is black and can resist organic solvent corrosion. It is suitable for industrial use and bad working conditions. It has high rigidity and precision. The PPS material can resist temperatures of 200 ℃.
VIDEOS
Calibrating the LP-WT600-1F Dispensing Pump
Weight | 5.2 kg |
CE marking | Yes |
IP-Rating | IP31 |
Speed | 10-600 rpm |
Flow rate | 0.7-6000 ml/min |
Power supply | AC 220V±20%/140W |
Operating Temperature | 0-40°C |
Relative humidity | < 80% |
Size (Length) | 285 mm |
Size (Height) | 180 mm |
Size (Width) | 207 mm |
Caption | Representative image only |
Title | Type | Size | Download |
---|---|---|---|
WT600-1F-Operating-Manual.pdf | 4.32MB | Download | |
WT600-1F(4F)-RS485-Protocol.pdf | 178.72KB | Download |