Low flow rate peristaltic pump for industrial use with keypad lock
The LP-G100-2J peristaltic pump is designed for industrial use and has a IP65 rating, which makes it suitable for use in humid or dusty environments.
The G100-2J peritaltic pump can be used in an incubator, as the manufacturer states that it can tolerate the normal operating conditions of a cell culture incubator of 95% humidity at 37°C.
The pump has a LCD screen to display the operating parameters and it can be controlled through by the membrane keypad or externally through the RS485 interface.
With an aluminum alloy casing the pump has good corrosion resistance and with the powerful electromagnetic compatibility, the pump will not behave unacceptably in an EMI environment and does not interfere with other electronic equipment.
Specifications
- Speed: 0 to 100 rpm, CW/CCW
- Speed resolution: 0.1 rpm
- Display: LCD
- Control mode: Membrane keypad ( external signal control and communication control is available)
- External control: Start/stop and direction control: voltage level signal or switch signal
- Speed control: 0-5V,0-10V,4-20mA,0-10kHz are optional with uniform interface, max speed can be changed within 100rpm.
- Communication control: RS485 interface, Longer protocol or Modbus protocol, the communication parameters (baud rate, parity, stop bit) can be set through the keypad.
- Parameter memory: Running parameters and system parameters will be saved automatically.
- Running state when power on: The running state when power on can be set as stop or as previous state.
- Prime: Fast filling or emptying at full speed
- EMC: Comply with EMC Directive 2014/30/EU
- Keypad lock function: Keypad can be locked and the locking delay time can be set.
- Power supply: AC90V-260V/20W,50-60Hz
- Operating temperature: 0℃-40℃
- Relative humidity: 10%-90%
- IP65
Operating Manual
- Supplied with English operating manual
Parameters
Drive | Pump head | Tubing size (#) | Flow rates (ml/min/channel) at 0.1 - 100 rpm (measured with water) | Weight (kg) |
LP-G100-1J |
YZ1515X YZII15 (3 rollers) | 13 | 0.006 - 6.3 | 4.04 |
14 | 0.025 - 25 | |||
19 | 0.042 - 41.66 | |||
16 | 0.077 - 77.7 | |||
25 | 0.16 - 160 | |||
17 | 0.26 - 266.7 | |||
18 | 0.36 - 366.7 | |||
YZ2515X, YZII25 (3 rollers) | 15 | 0.16 - 160 | 4.04 | |
24 | 0.26 - 266.7 | |||
YZII25 (3 rollers) | 35 | 0.36 - 360 | 4.04 | |
36 | 0.5 - 500 | |||
FG15-13 (3 rollers) | 13 | 0.005 - 5.3 | 3.92 | |
14 | 0.03 - 30 | |||
19 | 0.06 - 61.67 | |||
16 | 0.11 - 106.67 | |||
25 | 0.23 - 230 | |||
17 | 0.36 - 360 | |||
18 | 0.4 - 400 | |||
FG25-13 (3 rollers) | 15 | 0.223 - 223.3 | ||
24 | 0.367 - 366.7 | |||
DMD15-13-B (3 rollers) | 13 | 0.013 - 13.3 | 4.07 | |
14 | 0.05 - 50 | |||
19 | 0.103 - 103.3 | |||
16 | 0.16 - 160 | |||
25 | 0.35 - 350 | |||
BZ15-13-A | 14 | 0.025 - 25 | 3.95 | |
BZ15-13-B | 16 | 0.077 - 77.7 | ||
BZ15-13-C | 25 | 0.16 - 160 | ||
BZ15-13-D | 17 | 0.267 - 266.7 | ||
BZ25-13-B | 24 | 0.267 - 266.7 | ||
DG15-24 (2 channels) | 16 | 0.817 - 81.57 | 4.46 | |
25 | 0.192 - 191.67 | |||
17 | 0.30 - 300.0 | |||
DG15-28 (2 channels) | 13#, 14# ID ≤3.17mm Wall thickness (WT): 0.8-1mm |
Max. 75 | 4.31 | |
DG-(1, 2, 4, 6, 8) 6 rollers | ID ≤3.17mm WT: 0.8-1mm |
Max. 48 | 3.84-3.91 | |
DG-(1, 2, 4) 10 rollers | Max. 32 |
Videos
Installing the LP-FG15-13 Pump Head
Basic Operation
Communication Control
Using a Footswitch
Certifications/Compliances | Comply with EMC Directive 2014/30/EU |
Weight | 3.64 kg |
Colour | Blue, Black |
Material | Aluminum Alloy |
CE marking | Yes |
IP-Rating | IP65 |
Speed | 0-100 rpm |
Power supply | AC90V-260V/20W, 50-60Hz |
Operating Temperature | 0℃ -40℃ |
Relative humidity | 10% -90% |
Size (Length) | 240 mm |
Size (Height) | 152 mm |
Size (Width) | 142 mm |
Caption | Representative image only |
Title | Type | Size | Download |
---|---|---|---|
G100-1J-G300-1E-G300-1J-operating-manual.pdf | 1.37MB | Download | |
G100-2J-Datasheet-2021.pdf | 3.98MB | Download | |
G100-2J-G300-2J-Peristaltic-Pumps----Operating-Manual-2021.pdf | 1.46MB | Download |